SISU – More Protection. Less Mouthguard.
This is a mouthguard designed for fierce athletes who expect nothing less than the best from their mouthguard. Perfect for hockey, Lacrosse, Soccer, basketball and more!
Provides unmatched comfort you’ve come to expect from SISU
Made in the USA
FDA Approved
BPA, Latex, PVC, Phthalate free
The Aero is made from a high-tech thermoplastic material that is 30% stronger and has 8x greater tensile strength than conventional mouthguard materials. This means that no matter how intense things get during game time, your SISU Aero has your back and your teeth.
The most unique feature of the SISU Aero is its super-slim, ultralight design. At a lean 1.6 mm, the Aero is 50% thinner than your standard mouthguard. Combined with its quick, custom and remoldable fit, you´ll entirely forget there´s something awesome and plastic inside your mouth.
Two minutes is all you need to mold the perfect fit for your SISU Mouthguard!
Just follow these simple step-by-step instructions:
Fitting Checklist:
Bowl
Hot – but not boiling – water (140 degrees Fahrenheit)
Fork or similar utensil
Mirror
Instructions:
1.Wash your hands and the material with soap and water.
2.Heat water in a small bowl to approximately 140 degrees Fahrenheit / 60 degrees Celsius
(hot to the touch, but not boiling).
3.Place your SISU into the hot water and wait until it becomes soft and pliable (use a fork or other utensil to determine mouthguard softness).
4.Once soft, carefully lift the SISU out of the water with a fork.It’s essential that you do not let the softened guard fold on itself. The material will glue together, making it difficult to reshape.
5.Balancing the pliable mouthguard with your thumbs, tilt your head back and open your mouth widely. Using a mirror, insert the mouthguard and bite down gently on the solid bar in the middle of the SISU – just enough to keep the guard in place.
6.Press your tongue to the roof of your mouth while flipping up the softened material to your front teeth. Then starting at the back of your mouth, use your fingertips to mold the material up against your teeth moving from back to front – covering the outside of your teeth to create a solid shield.
7.Once the material is completely molded, close your lips over the mouthguard and gently suck in air until the material has hardened to a snug, perfect fit.
8.If you messed up, don’t sweat it! Every SISU guard is remoldable up to 20 times. Simply place your formed SISU back in the hot water, let it soften and straighten out, and start the process again.
SISU – More Protection. Less Mouthguard.
This is a mouthguard designed for fierce athletes who expect nothing less than the best from their mouthguard. Perfect for hockey, Lacrosse, Soccer, basketball and more!
Provides unmatched comfort you’ve come to expect from SISU
Made in the USA
FDA Approved
BPA, Latex, PVC, Phthalate free
The Aero is made from a high-tech thermoplastic material that is 30% stronger and has 8x greater tensile strength than conventional mouthguard materials. This means that no matter how intense things get during game time, your SISU Aero has your back and your teeth.
The most unique feature of the SISU Aero is its super-slim, ultralight design. At a lean 1.6 mm, the Aero is 50% thinner than your standard mouthguard. Combined with its quick, custom and remoldable fit, you´ll entirely forget there´s something awesome and plastic inside your mouth.
Two minutes is all you need to mold the perfect fit for your SISU Mouthguard!
Just follow these simple step-by-step instructions:
Fitting Checklist:
Bowl
Hot – but not boiling – water (140 degrees Fahrenheit)
Fork or similar utensil
Mirror
Instructions:
1.Wash your hands and the material with soap and water.
2.Heat water in a small bowl to approximately 140 degrees Fahrenheit / 60 degrees Celsius
(hot to the touch, but not boiling).
3.Place your SISU into the hot water and wait until it becomes soft and pliable (use a fork or other utensil to determine mouthguard softness).
4.Once soft, carefully lift the SISU out of the water with a fork.It’s essential that you do not let the softened guard fold on itself. The material will glue together, making it difficult to reshape.
5.Balancing the pliable mouthguard with your thumbs, tilt your head back and open your mouth widely. Using a mirror, insert the mouthguard and bite down gently on the solid bar in the middle of the SISU – just enough to keep the guard in place.
6.Press your tongue to the roof of your mouth while flipping up the softened material to your front teeth. Then starting at the back of your mouth, use your fingertips to mold the material up against your teeth moving from back to front – covering the outside of your teeth to create a solid shield.
7.Once the material is completely molded, close your lips over the mouthguard and gently suck in air until the material has hardened to a snug, perfect fit.
8.If you messed up, don’t sweat it! Every SISU guard is remoldable up to 20 times. Simply place your formed SISU back in the hot water, let it soften and straighten out, and start the process again.
| STORE LOGO | PRICE | LINK |
|---|---|---|
 |
$24.99 | Go to Store |
SISU – More Protection. Less Mouthguard.
This is a mouthguard designed for fierce athletes who expect nothing less than the best from their mouthguard. Perfect for hockey, Lacrosse, Soccer, basketball and more!
Provides unmatched comfort you’ve come to expect from SISU
Made in the USA
FDA Approved
BPA, Latex, PVC, Phthalate free
The Aero is made from a high-tech thermoplastic material that is 30% stronger and has 8x greater tensile strength than conventional mouthguard materials. This means that no matter how intense things get during game time, your SISU Aero has your back and your teeth.
The most unique feature of the SISU Aero is its super-slim, ultralight design. At a lean 1.6 mm, the Aero is 50% thinner than your standard mouthguard. Combined with its quick, custom and remoldable fit, you´ll entirely forget there´s something awesome and plastic inside your mouth.
Two minutes is all you need to mold the perfect fit for your SISU Mouthguard!
Just follow these simple step-by-step instructions:
Fitting Checklist:
Bowl
Hot – but not boiling – water (140 degrees Fahrenheit)
Fork or similar utensil
Mirror
Instructions:
1.Wash your hands and the material with soap and water.
2.Heat water in a small bowl to approximately 140 degrees Fahrenheit / 60 degrees Celsius
(hot to the touch, but not boiling).
3.Place your SISU into the hot water and wait until it becomes soft and pliable (use a fork or other utensil to determine mouthguard softness).
4.Once soft, carefully lift the SISU out of the water with a fork.It’s essential that you do not let the softened guard fold on itself. The material will glue together, making it difficult to reshape.
5.Balancing the pliable mouthguard with your thumbs, tilt your head back and open your mouth widely. Using a mirror, insert the mouthguard and bite down gently on the solid bar in the middle of the SISU – just enough to keep the guard in place.
6.Press your tongue to the roof of your mouth while flipping up the softened material to your front teeth. Then starting at the back of your mouth, use your fingertips to mold the material up against your teeth moving from back to front – covering the outside of your teeth to create a solid shield.
7.Once the material is completely molded, close your lips over the mouthguard and gently suck in air until the material has hardened to a snug, perfect fit.
8.If you messed up, don’t sweat it! Every SISU guard is remoldable up to 20 times. Simply place your formed SISU back in the hot water, let it soften and straighten out, and start the process again.
SISU – More Protection. Less Mouthguard.
This is a mouthguard designed for fierce athletes who expect nothing less than the best from their mouthguard. Perfect for hockey, Lacrosse, Soccer, basketball and more!
Provides unmatched comfort you’ve come to expect from SISU
Made in the USA
FDA Approved
BPA, Latex, PVC, Phthalate free
The Aero is made from a high-tech thermoplastic material that is 30% stronger and has 8x greater tensile strength than conventional mouthguard materials. This means that no matter how intense things get during game time, your SISU Aero has your back and your teeth.
The most unique feature of the SISU Aero is its super-slim, ultralight design. At a lean 1.6 mm, the Aero is 50% thinner than your standard mouthguard. Combined with its quick, custom and remoldable fit, you´ll entirely forget there´s something awesome and plastic inside your mouth.
Two minutes is all you need to mold the perfect fit for your SISU Mouthguard!
Just follow these simple step-by-step instructions:
Fitting Checklist:
Bowl
Hot – but not boiling – water (140 degrees Fahrenheit)
Fork or similar utensil
Mirror
Instructions:
1.Wash your hands and the material with soap and water.
2.Heat water in a small bowl to approximately 140 degrees Fahrenheit / 60 degrees Celsius
(hot to the touch, but not boiling).
3.Place your SISU into the hot water and wait until it becomes soft and pliable (use a fork or other utensil to determine mouthguard softness).
4.Once soft, carefully lift the SISU out of the water with a fork.It’s essential that you do not let the softened guard fold on itself. The material will glue together, making it difficult to reshape.
5.Balancing the pliable mouthguard with your thumbs, tilt your head back and open your mouth widely. Using a mirror, insert the mouthguard and bite down gently on the solid bar in the middle of the SISU – just enough to keep the guard in place.
6.Press your tongue to the roof of your mouth while flipping up the softened material to your front teeth. Then starting at the back of your mouth, use your fingertips to mold the material up against your teeth moving from back to front – covering the outside of your teeth to create a solid shield.
7.Once the material is completely molded, close your lips over the mouthguard and gently suck in air until the material has hardened to a snug, perfect fit.
8.If you messed up, don’t sweat it! Every SISU guard is remoldable up to 20 times. Simply place your formed SISU back in the hot water, let it soften and straighten out, and start the process again.
